Battery indicator (Remaining battery is low)

• When the battery level is low, is displayed. Charge the battery pack immediately.

ERROR

• Turn the power off and then on again.
• An unknown error has occurred on USTREAM, when using the Live Streaming function. Wait a moment and then try confirming the connection again.

HEAT

• The camera temperature has risen. The power may turn off automatically, or you may be unable to record images.

  Leave the camera in a cool location until the temperature goes down.

• If you record images for an extended period, the camera temperature rises. In this case, stop recording images.

NoIMG

• The memory card does not contain playable images.

LowPw

• There is no remaining battery charge.

BATT

• Battery charge is insufficient for operation.
• The battery pack is delivering current exceeding the maximum discharge current (beyond which proper operation of the camera cannot be assured when an external microphone, etc., is connected).
• A different battery pack is detected when the camera is powered on.
• Battery pack deterioration is detected.

SHORT

• The remaining capacity of the memory card is insufficient for loop recording.

FULL

• Remaining capacity of the memory card is insufficient for recording.

MAX

• The maximum number of files that can be recorded has been reached.

MEDIA

• The memory card is not inserted properly.
• The memory card is damaged.
• The memory card does not support XAVC S movie recording.

NoCRD

• There is no memory card inserted.

NoDSP

• The camera is not connected to a TV when playback is started.

PLANE

• When the airplane mode is set to [ON], GPS and Wi-Fi cannot be used.

NoSET

• Set the necessary settings for USTREAM using “Camera Settings for Live Streaming” of the Action Cam Movie Creator’s camera settings.

Auth

• Log in to USTREAM again and confirm the settings using “Camera Settings for Live Streaming” of the Action Cam Movie Creator’s camera settings.

CHANL

• The channel set by “Camera Settings for Live Streaming” of the Action Cam Movie Creator’s camera settings is incorrect.
• This message also displays if other media starts streaming on the same channel while streaming from your camera is performed.
• Set the channel again.

DATE

• Set the date and time again on your camera.

APErr

• Access point has been found but is not connected. Check the password of the access point and connect again.

PREP

• The network is temporarily unavailable.

Netwk

• The saving settings of video cannot be saved to USTREAM because an error has occurred on the network.
• Some other network error has occurred.
• Confirm the setting of the access point or the security of the access point using “Camera Settings for Live Streaming” of the Action Cam Movie Creator’s camera settings.

NO AP

• Access point cannot be found. Confirm the setting of the access point using “Camera Settings for Live Streaming” of the Action Cam Movie Creator’s camera settings.

LIMIT

• The total time of saved video on USTREAM has reached the limit. Stop streaming video.

TWErr

• Twitter post error has occurred.
• Check the network or log in to Twitter again.

FBErr

• Facebook post error has occurred.
• Check the network or log in to Facebook again.