HDD AUDIO PLAYERHAP-Z1ES

Prep 1. Connecting an amplifier

First, you need to connect an amplifier to the HDD AUDIO PLAYER.

Note

  • Make sure that the AC power cord (mains lead) of the HDD AUDIO PLAYER is unplugged when connecting any other cord.

Connecting to the LINE OUT UNBALANCED jacks using an audio cord

Connect an amplifier to the LINE OUT UNBALANCED jacks on the rear panel of the HDD AUDIO PLAYER using an audio cord (supplied) as shown in the illustration below.

: LINE OUT UNBALANCED L/R jacks of the HDD AUDIO PLAYER

: Audio cord (supplied)

: Analog input jack of an amplifier

Connecting to the LINE OUT BALANCED jacks using XLR balanced cords

Connect an amplifier to the LINE OUT BALANCED jacks on the rear panel of the HDD AUDIO PLAYER using XLR balanced cords (not supplied).

: LINE OUT UNBALANCED L/R jacks of the HDD AUDIO PLAYER

: XLR balanced cords (not supplied)

: Analog input jack of an amplifier

Operating a connected amplifier

You can operate a connected amplifier using the remote control supplied with the HDD AUDIO PLAYER or the dedicated application if you connect the supplied monaural mini-plug cable or IR blaster.

When you use a Sony amplifier equipped with an IR input jack.

: IR REMOTE OUT jack of the HDD AUDIO PLAYER

: Monaural mini-plug cable (supplied)

: IR input jack of an amplifier

For details on how to operate an amplifier, see “Operating a Sony amplifier using the remote control or dedicated application.”

When you use a Sony amplifier not equipped with an IR input jack or an amplifier from other manufacturers.

: IR REMOTE OUT jack of the HDD AUDIO PLAYER

: IR blaster (supplied)

: The remote sensor (receiver) of a connected amplifier

For details on how to operate an amplifier, see “Operating an amplifier manufactured by another company using the supplied remote control or a dedicated application.”

Note

  • The XLR balanced cords are locked in place. Forcibly removing them may damage the connected devices. Make sure to unlock and disconnect the XLR balanced cord before moving the HDD AUDIO PLAYER.
  • The HDD AUDIO PLAYER is equipped with a built-in antenna for wireless LAN. Make sure to keep a distance between the HDD AUDIO PLAYER and speakers or other devices to maintain good wireless communication.

Hint

  • When you connect an amplifier to the HDD AUDIO PLAYER using the XLR balanced cords, the output is less affected by surrounding noise sources.