MULTI CHANNEL AV RECEIVERSTR-DN1060/STR-DN860

Outputting a test tone from each speaker (Test Tone)

You can output a test tone from each speaker in sequence.

  1. Select [Setup] - [Speaker Settings] from the home menu.
  2. Select [Test Tone].
  3. Select the setting you want.
    • Off
    • Auto: The test tone is output from each speaker in sequence.
    • Front L, Center, Front R, Surround R, Surround L, Sur Back L, Sur Back (*), Sur Back R, Front High L, Front High R, Subwoofer: You can select which speakers will output the test tone.

      * [Sur Back] appears when only one surround back speaker is connected.

  4. Adjust the speaker level.

Note

  • This function is not available when [Bluetooth Mode] is set to [Transmitter].

Hint

  • To adjust the level of all speakers at the same time, press +/–. You can also use MASTER VOLUME on the receiver.
  • The adjusted value is shown on the TV screen during adjustment.


To output a test tone from adjacent speakers

See “Adjusting the balance between adjacent speakers by outputting a test tone (Phase Noise).”

To output the source sound from adjacent speakers

See “Adjusting the balance between adjacent speakers by outputting a source sound (Phase Audio).”