Enjoying sound of an ARC compatible TV (Audio Return Channel)

If your TV supports the Audio Return Channel (ARC) function, set the receiver by the following procedure to output the sound of the TV from the speakers connected to the receiver.

  1. Select [Setup] - [HDMI Setup] from the home menu.
  2. Select [Audio Return Channel].
  3. Select the setting you want.
    • On: The sound of the TV connected to the receiver via the HDMI OUT A jack is output from the receiver when TV input is selected.
    • Off: The sound of the TV connected to the receiver via the HDMI OUT A jack is not output from the receiver even when TV input is selected.

If you connect to a TV that is not compatible with the Audio Return Channel (ARC) function or you want to select an audio signal using a cable other than an HDMI cable (e.g. via an optical digital cable or an audio cable)

Switch the audio input mode.

Note

  • Be sure to turn off the volume of the TV or activate the muting function of the TV.
  • If your TV does not support the System Audio Control function, set [Audio Out] to [TV + AMP] in the [HDMI Setup] menu to output the sound of the TV from the TV speaker and the speakers connected to the receiver.