4K Media PlayerFMP-X10

Configuring the internet connection (only when using a wired LAN connection)

Check the network environment requirements and then connect the 4K Media Player to the internet via a wired LAN connection.

Required network environment

LAN (100) port:

100BASE-T

(The network speed may differ depending on the network environment.)

LAN cable:

  • We recommend using a LAN cable that is Cat5 or higher. A normal-type cable is also recommended, as some flat-type LAN cables are easily affected by noise.
  • If the receiver is used in an environment with power supply noise from electronic devices or in a noisy network environment, use a shielded-type LAN cable.

Note

  • Use a router that is compatible with transmission speeds of 16 Mbps or faster to enjoy Netflix. If the transmission speed is less than 16 Mbps, 4K content is streamed at a lower image quality.
  • It takes about 20 hours to complete content download on Video Unlimited 4K at normal transmission speeds. It may take longer depending on the transmission speeds.

Connection

Connect the 4K Media Player to the internet via a wired LAN connection as illustrated below.

: LAN (100) port of the 4K Media Player

: LAN cable (not supplied)

: Internet

: Modem

: Router