Interchangeable Lens Digital Camera ILCE-7SM2

SteadyShot Settings

You can shoot with an appropriate [SteadyShot] setting for the attached lens.

  1. MENU (Camera Settings) → [SteadyShot][On]
  2. [SteadyShot Settings][SteadyShot Adjust.] → desired setting.

Menu item details

Auto:
Performs the SteadyShot function automatically according to the information obtained from the attached lens.
Manual:
Performs the SteadyShot function according to the focal-length set using [SteadyS. Focal Len.]. (8 mm-1000 mm)
  • Check the focal-length index (A) and set the focal-length.

Note

  • The SteadyShot function may not work optimally when the power has just been turned on, right after you point the camera towards a subject, or when the shutter button has been pressed all the way down without stopping halfway.
  • When using a tripod, make sure to turn off the SteadyShot function because this can cause any malfunction when shooting.
  • [SteadyShot Settings] will be unavailable when MENU(Camera Settings) → [SteadyShot] is set to [Off].
  • When the camera cannot obtain focal length information from the lens, the SteadyShot function does not work correctly. Set [SteadyShot Adjust.] to [Manual] and set [SteadyS. Focal Len.] to match the lens you are using. The current set value of the SteadyShot focal length will display to the side of .
  • When using an SEL16F28 lens (sold separately) with a teleconverter, etc., set [SteadyShot Adjust.] to [Manual] and set the focal length.
  • When you turn [SteadyShot] [On]/[Off], the in-body/in-lens SteadyShot settings switch at the same time.
  • If a lens equipped with a SteadyShot switch is attached, the settings can only be changed using that switch on the lens. You cannot switch the settings using the camera.