Interchangeable Lens Digital Camera ILCE-7SM2

Supplying power from a wall outlet (wall socket)

By using the supplied AC adaptor, you can shoot and playback images while the power is supplied from a wall outlet (wall socket) without using up the battery power.

  1. Insert the battery pack into the camera.
  2. Connect the camera to the wall outlet (wall socket) with a micro USB cable (supplied) and an AC adaptor (supplied).

Note

  • The camera will not activate if there is no remaining battery. Insert a sufficiently charged battery pack into the camera.
  • If you use the camera while power is being supplied from a wall outlet (wall socket), make sure that the icon () is displayed on the monitor.
  • Do not remove the battery pack while power is supplied from a wall outlet (wall socket). If you remove the battery pack, the camera will be turned off.
  • Do not remove the battery pack while the access lamp is lit. The data in the memory card may be damaged.
  • As long as the power is on, the battery pack will not be charged even if the camera is connected to the AC Adaptor.
  • Under certain conditions, power may be supplied from the battery pack supplementarily even if you are using the AC adaptor.
  • Do not remove the Micro USB cable while power is supplied from a wall outlet (wall socket). Before you remove the Micro USB cable, turn off the camera.
  • Depending on the camera and battery temperature, the continuous recording time may be shortened while power is supplied from a wall outlet (wall socket).
  • When using a mobile charger as a power source, confirm that it is fully charged before use. Also, be careful of the remaining power on the mobile charger during use.