About the indicators
|Lights up (green)||The speaker is turned on.|
|Lights up (orange)||The speaker is in the BLUETOOTH/Network standby mode. The BLUETOOTH/Network standby mode can be set only when this speaker is connected to an AC outlet via the USB AC adaptor. When the speaker is being powered by the built-in battery only, the BLUETOOTH/Network standby mode is not available.|
|Lights up (red)||The speaker is in the standby mode.|
|Turns off||The speaker is in the power saving mode.|
|Flashes (green)||When you turn on the speaker, the indicator flashes slowly in green, then lights up in green.|
|When you turn off the speaker, the indicator flashes slowly in green, then lights up in orange or red. While the indicator is flashing, the speaker is not operational.|
|When you press the -/+ (volume) buttons, the indicator flashes once or three times according to the volume adjustment.|
|Flashes (red)||The speaker is in the protect mode, or the software update has failed. See "The power indicator flashes in red."|
|Turns off||Charging the speaker is completed.|
|The indicator is off while charging with the speaker turned on.|
|Lights up (orange)||The speaker is being charged.|
|Flashes slowly (orange)||The built-in battery is running low. Charge the speaker.|
|Flashes (orange)||When you connect a micro-USB cable to the DC IN 5 V jack, the indicator flashes three times. When the speaker is turned on, the indicator will eventually turn off.|
|If the indicator continues flashing with the speaker turned off, the charging has failed. See "The CHARGE indicator flashes."|
|Turns off||The speaker is not connected to a network.|
|Lights up (orange)||The speaker is connected to a Wi-Fi network.|
|Flashes (orange)||The speaker is in the process of connecting to a Wi-Fi network.|
|Flashes (red)||The network connection failed.|
|Lights up (red)||The network connection failed, or connection failed even though the network setting is complete.|
AUDIO IN indicator*1
|Lights up (white)||The speaker is in the AUDIO IN mode.|
|Lights up||The speaker is in the USB mode.|
|Lights up (white)||The speaker is connected to a BLUETOOTH device.|
|Flashes quickly (white)||The speaker is pairing with a BLUETOOTH device.|
|Flashes (white)||The speaker is searching for a BLUETOOTH device to connect.|
|Lights up (white)||The speaker is in the NETWORK mode.|
|Lights up (green or light blue)||The speaker is connected to a music service.|
|Lights up (orange)||The speaker detected the availability of a software update while connected to the Internet. After pressing and holding the UPDATE button for 2 seconds while the indicator is lit, the software update starts when the speaker beeps.|
|Flashes (orange)||The speaker is updating the software. During the update, you cannot operate the speaker.|
|When the speaker turns on for the first time after the software update, the UPDATE button flashes three times to inform you that the update has completed.|
EXTRA BASS indicator
|Lights up||You can enjoy the bass sound effect.|
|Turns off||The bass sound effect is not activated. This is set as the default.|
Lights up or flashes depending on the status of the speaker while the Wireless Surround function, the Wireless Stereo function, or the Speaker Add function*6 is on.
*1When checking the Wi-Fi signal strength (reception sensitivity), the indicator is lit while connected to the Wi-Fi network.
*2When switching the wireless function to on/off, the indicator flashes.
*3When switching the BLUETOOTH audio streaming playback quality of the speaker, the indicator flashes.
*4When disabling the Wi-Fi network function and BLUETOOTH network function, the indicator flashes.
*5If the software updating has failed, the indicator is lit.
*6Available when updating your speaker's pre-installed software