Personal Audio SystemSRS-X99

Listening with the AirPlay function (iPhone/iPad/iPod touch)

You can enjoy music stored in an iPhone/iPad/iPod touch wirelessly using AirPlay.

Update the iPhone/iPad/iPod touch to the latest version in advance.

  1. Connect the speaker and an iPhone/iPad/iPod touch to the same network.

    Connect the speaker and your iPhone/iPad/iPod touch to the same SSID of the wireless router.

    The LINK indicator lights up in orange or pink when the connection is complete.

  2. Tap the NETWORK button.

    The NETWORK indicator lights up in white, and the speaker switches to NETWORK mode.

    The speaker can also be switched to NETWORK mode automatically, instead of tapping the NETWORK button, by selecting the speaker in the AirPlay menu of the iPhone/iPad/iPod touch, then playing back music.

  3. Swipe the screen of the iPhone/iPad/iPod touch from the bottom to the top to open the control center.

  4. Touch (AirPlay).

  5. Select [SRS-X99] on the AirPlay menu of the iPhone/iPad/iPod touch.

  6. Start playing back music on the iPhone/iPad/iPod touch, and adjust the volume.

    The selected song will be heard from the speaker.

    If playback does not start, perform the process again from step 3.

To enjoy a more dynamic sound

Remove the speaker grille from the front of the speaker with the speaker grille detach tool (supplied).*

*Keep the removed grille on a flat surface to prevent distortion.

Note

  • Do not touch the exposed part of the speaker (speaker units) after removing the speaker grille.

Using the speaker or remote control during playback

You can adjust the volume using the VOL (volume) -/+ buttons of the speaker or the VOLUME +/- buttons of the remote control.

You can also use the MUTING button, (Play/Pause) button, or / (Previous/Next) button of the remote control.

Hint

  • The procedure explained above is for guidance only. For details, refer to the operating instructions supplied with the device.
  • The window above is an example of iOS8.
  • After SongPal is downloaded and installed to your iPhone, you can use your iPhone as a remote control to operate devices connected to the speaker.
  • The volume level set by the VOL (volume) -/+ buttons of the speaker and that set in your iPhone/iPad/iPod touch are synchronized.

Note

  • Loud sound may be output from the speaker if you set the volume too high by the iPhone/iPad/iPod touch.
  • In some cases, the volume level of the iPhone/iPad/iPod touch might not synchronize with the volume level of the speaker.