Listening to music of a device via BLUETOOTH connection

You can enjoy listening to music of a BLUETOOTH device and operate it by the speaker via BLUETOOTH connection if it supports the following BLUETOOTH profiles.

A2DP (Advanced Audio Distribution Profile)

Enables you to enjoy high-quality audio contents wirelessly.

AVRCP (Audio Video Remote Control Profile)

Enables you to adjust the volume of a BLUETOOTH device.


Operations may vary depending on the BLUETOOTH device. Refer also to the operating instructions supplied with the BLUETOOTH device.

Note

  • Make sure beforehand that the volume on the BLUETOOTH device and speaker are set to a moderate level to avoid sudden loud sound output from the speaker.
  1. Connect the speaker with the BLUETOOTH device.

    The (BLUETOOTH) indicator lights up in white when the BLUETOOTH connection is established.

  2. Start playback on the BLUETOOTH device.
  3. Adjust the volume by pressing the /+ (volume) buttons on the speaker or operating the BLUETOOTH device.

    When you press the /+ (volume) buttons on the speaker or adjust the volume on the BLUETOOTH device, the (power) indicator flashes once or 3 times in white.

    During playback, you can use the buttons on the speaker to perform the following operations.

    Pause

    Press the (play) button during playback to pause. Press it again to cancel pause.

    Skip to the beginning of the next track

    Press the (play) button twice during playback.

    Skip to the beginning of the current track

    Press the (play) button 3 times during playback.

Hint

  • The battery can be charged if the speaker is connected to an AC outlet though the speaker is in use.
  • Depending on the BLUETOOTH device, it may be necessary to adjust the volume or set the audio output setting on the connected device.
  • When you set the volume to the maximum or minimum level on the speaker, the (power) indicator flashes 3 times.
  • Depending on the BLUETOOTH device, it may be necessary to adjust the volume or set the audio output setting on the connected device.

Note

  • If the communication condition is poor, the BLUETOOTH device may react incorrectly against the operations on the speaker.
  • When you connect a portable audio device, etc., to the speaker’s AUDIO IN jack while listening to music via BLUETOOTH connection, the speaker switches to the AUDIO IN mode automatically. In this case, music of the BLUETOOTH device is not output (if the BLUETOOTH connection is active, the hands-free function is available). To listen to music from the BLUETOOTH device again, disconnect the audio cable from the speaker’s AUDIO IN jack.
  • When using in a place with a high temperature, the volume may decrease to protect the battery.
  • If the battery level is low, the maximum output of the speaker decreases.