HDMI

Note that HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to display content from an HDMI device.
If the TV does not recognise the HDMI device and no picture is displayed, switch the source from one device to another and back again.
If the picture and sound of a device connected to HDMI is distorted, connect the device to another HDMI port on TV and power reboot your source device.
If there are intermittent sound disruptions, make sure that output settings from the HDMI device are correct.
If you use an HDMI-to-DVI adapter or HDMI-to-DVI cable, make sure that an additional audio cable is connected to AUDIO IN (mini-jack only), if available.

HDMI EasyLink does not work

Make sure that your HDMI devices are HDMI-CEC compatible. EasyLink features only work with devices that are HDMI-CEC compatible.

When an HDMI-CEC audio device is connected and you use the TV Remote Control to adjust the volume level from the device, this behaviour is normal.

Make sure that the USB storage device is set to Mass Storage Class compliant, as described in the storage device's documentation.
Make sure that the USB storage device is compatible with the TV.
Make sure that the audio and picture file formats are supported by the TV.

The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback.