Task

Using Sleep Mode

In Sleep mode, all unnecessary devices of your VAIO computer are turned off, though some devices stay on to retain the computer’s state including data you are working on. Sleep mode is useful when you take a short rest, for example.

With the default Sleep mode settings, Rapid Wake is enabled and the computer’s state is saved to the built-in storage device.

To activate Sleep mode

Open the charms [Details] and select the Settings charm.

Select Power and Sleep.

The power indicator light turns off when your VAIO computer enters Sleep mode.

Hint

By default, your VAIO computer enters Sleep mode automatically after about 30 minutes of inactivity while running on AC power.

The operations below also place your VAIO computer into Sleep mode.

Press the (Power) button (with the default setting).
Note that if you press and hold down the (Power) button for more than four seconds, your VAIO computer will turn off automatically. Doing this will erase all unsaved data.

Close the LCD screen lid and leave the computer unused for a few seconds.

To return to Normal mode

Press the (Power) button.

Note

Your VAIO computer does not return to Normal mode with keyboard and touch pad operations.

By default, your VAIO computer automatically enters Hibernate mode when the battery pack is running out of power. However, depending on the operating conditions, the computer may fail to enter Hibernate mode.
If this occurs and the battery pack is running out of power, the computer will be turned off, resulting in loss of unsaved data.
While the computer is running on battery power, save data frequently.

Before moving your VAIO computer, make sure that the power indicator light is off to avoid impact or vibration to the running hard disk drive.

Hint

If you press and hold down the (Power) button for more than four seconds, your VAIO computer will turn off automatically. Doing this will erase all unsaved data.

You can set to restore your VAIO computer from Sleep mode to Normal mode by opening the LCD screen lid.
To change the action when you open the lid, start VAIO Control Center [Details] and change the settings in Power and Battery.