NWZ-B160 Series | Charging the battery

Top page > Getting Started > Power/Charging > Charging the battery

Charging the battery

Remove the USB cap and connect the USB connector to a USB connector on your computer.

Display

When charging the battery, you can check the battery charging status.

Battery charging status on the display

Status	Description
	Charging (*1).
	Charging is completed (*1).
Blank screen	The battery is not being charged (*2).

(*1) Charging time is approx. 70 minutes. When charging is completed, disconnect the player from the USB connector of your computer.

(*2) If the computer enters a power saving mode, such as the Sleep or Hibernation mode, the player’s screen may turn off. In this case, the player consumes battery power.

Hint

Depending on the computer, changing the settings of the Sleep or Hibernation mode varies. Refer to the manufacturer.

When you use the player for the first time, or if you have not used the player for a long time, recharge it fully (until the battery charge indicator displays ).

About the battery indicator

The battery indicator in the screen shows the remaining battery charge.

As the battery power gets lower, the bars of the icon disappear. If [LOW BATTERY] appears, you cannot use the player. In this case, charge the battery by connecting the player to your computer. See [Details] on battery duration.

Hint

When charging a depleted battery, the power illuminator blinks clockwise and nothing appears in the display.

Note

If you charge the player when it has not been used for a long period, your computer may not recognize the player, or nothing may appear on the display. Charge the player for about 5 minutes, after which it should start operating normally again.

Charge the battery in an ambient temperature of between 5 ºC to 35 ºC (41 ºF to 95 ºF). If you try to charge the battery in an ambient temperature outside this range, the icon may appear, and charging cannot be performed.

The number of times the battery can be recharged before it is used up is approximately 500 times. This number may vary, depending on the conditions under which you use the player.

[DATA ACCESS] or [DON’T DISCONNECT] appears in the display while the computer accesses the player. During this time, do not disconnect the USB connector; otherwise, data being transferred (or data already in the player) may be damaged.

The control buttons on the player become inoperative while it is connected to a computer.

To prevent battery deterioration, charge the battery at least once every half a year or every year.

Some USB devices connected to the computer may interfere with proper operation of the player.

We do not guarantee battery recharging using a personally assembled/modified computer.

Do not leave the player connected for extended periods to a laptop computer that is not connected to AC power, since the player may discharge the computer’s battery.

While the player is connected to a computer, do not turn on, restart, wake up from sleep mode, or shut down the computer. These operations may cause the player to malfunction. Disconnect the player from the computer before performing these operations.

Heat may build up in the player while charging. This is not a malfunction.