Digital Media PlayerNW-ZX2

Pairing a Bluetooth audio device

To connect with a new Bluetooth audio device, you need to pair with it while the Bluetooth function of your Walkman is on. You only need to do this once between the Walkman and the new Bluetooth audio device. Just turn on the device the next time.

  1. Put the Bluetooth audio device you want to connect with in discoverable mode.
    Refer to the operating instructions supplied with the Bluetooth audio device for details on procedures for putting it in discoverable mode.
  2. Swipe the status bar down and tap - [BLUETOOTH].
    Make sure the Bluetooth function is on. If not, turn on the Bluetooth function.
  3. Tap the device you want to pair with from the list.
    If the device you want to connect with is not displayed in the [AVAILABLE DEVICES] list, check that the Bluetooth audio device you want to connect with is in discoverable mode and tap [SEARCH FOR DEVICES] on the screen of your Walkman. If a number is displayed on the screen of the Walkman, make sure the same number is displayed on that device.

    The pairing and connection status will be displayed under the Bluetooth audio device name.
    With some devices, a connection is established after pairing.

Hint

  • If the Bluetooth audio device you want to connect with has an NFC function, pairing and connection can be made with one touch.

Note

  • A passkey (*1) input screen is displayed for some devices. Check the passkey of the other device, and input the passkey.

    (*1) “Passkey” is also called “Pass code,” “PIN code,” “PIN number,” or “Password.” For the passkey of the other device, refer to the manual of that device.