Upload Settings

Sets whether to use the upload function of an Eye-Fi card (commercially available), when you use the Eye-Fi card with this camera.
[Upload Settings] is displayed only when the Eye-Fi card is inserted in the camera.
  1. MENU 2 [Upload Settings] desired mode


On
Uses the upload function.
The Eye-Fi mode display icon on the screen will change depending on the communication mode of the Eye-Fi card.
: Eye-Fi card is in standby mode. There is no image to be sent.
: Eye-Fi card is in upload standby mode.
: Eye-Fi card is in connecting mode.
: Eye-Fi card is uploading images.
: An error has occurred.

Off
Does not use the upload function.

Notes
  • As of June 2012, Eye-Fi cards are sold in the U.S.A., Canada, Japan and some countries in the European Union.

  • For more information on the Eye-Fi card, contact the manufacturer or seller of Eye-Fi cards directly.

  • Eye-Fi cards are permitted only in the countries and regions in which they were purchased. You may be held liable due to local restrictions.

  • The Eye-Fi card has a wireless LAN function. Do not insert the Eye-Fi card where wireless LAN is prohibited, such as while aboard an airplane. If the Eye-Fi card is inserted, set [Upload Settings] to [Off]. When the uploading function of the Eye-Fi card is set to [Off], is displayed on the screen.

Transferring image data using the Eye-Fi card

  1. Set the wireless LAN access point settings or the transferring direction settings of the Eye-Fi card.

For details, refer to the operating instructions supplied with the Eye-Fi card.
  1. After the settings are finished, insert the Eye-Fi card into the camera, and shoot the images.

The recorded images are automatically transferred via wireless LAN to a PC, etc.
Notes
  • When uploading image data, the Auto power-off function is not available.

  • If the (error) icon is displayed, eject and re-insert the Eye-Fi card, or turn the power of the camera off and on again. If the (error) icon is still displayed, the Eye-Fi card may be corrupted. For details, contact Eye-Fi, Inc.

  • Wireless LAN communication may be interrupted by other communication devices. If data reception is insufficient, move the camera closer to the access point.

  • Some Eye-Fi cards have an “Endless Memory Mode.” This product does not support “Endless Memory Mode.” Make sure that Eye-Fi cards that you insert into this product have “Endless Memory Mode” turned off. For details on setting “Endless Memory Mode”, refer to the operating instructions supplied with the Eye-Fi card.