Note

• If you fire the flash before the flash unit pops up entirely, it may cause malfunction.
• You cannot use the flash when recording movies.
• While charging the flash, flashes. After charging is completed, the flashing icon will light up.
• When an external flash (sold separately) is attached to the Multi Interface Shoe, the state of the external flash has priority over the setting of the product. You cannot use the product’s internal flash.
• Before attaching/removing an accessory such as a flash to/from the Multi Interface Shoe, turn off the product first.
  When attaching an accessory, insert it fully to the Multi Interface Shoe and screw tightly. Also, make sure that the accessory is fixed securely to the product.
• Do not use a commercially available flash with high-voltage synchro terminals or with reverse polarity.
• When shooting with the flash and the zoom is set to W, the shadow of the lens may appear on the screen, depending on the shooting conditions. If this happens, shoot away from the subject or set the zoom to T and shoot with the flash again.
• When the monitor is tilted upward more than 90 degrees, it is difficult to operate the (Flash pop-up) button. Raise the flash unit before adjusting the monitor angle.