Digital Still Camera DSC-RX10M2

Picture Profile

Allows you to change the settings for the color, gradation, etc.
For details on “Picture Profile,” refer to http://helpguide.sony.net/di/pp/v1/en/index.html.


Customizing the picture profile

You can customize the picture quality by adjusting picture profile items such as [Gamma] and [Detail]. When setting these parameters, connect the camera to a TV or monitor, and adjust them while observing the picture on the screen.

  1. MENU (Camera Settings) → [Picture Profile] → the profile you want to change.
  2. Move to the item index screen by pressing the right side of the control wheel.
  3. Select the item to change using the up/down sides of the control wheel.
  4. Select the desired value using the up/down sides of the control wheel and press in the center.

Using the preset of the picture profile

The default settings [PP1] through [PP7] for movies have been set in advance in the camera based on various shooting conditions.
MENU (Camera Settings) → [Picture Profile] → desired setting.
PP1:
Example setting using [Movie] gamma
PP2:
Example setting using [Still] gamma
PP3:
Example setting of natural color tone using the [ITU709] gamma
PP4:
Example setting of a color tone faithful to the ITU709 standard
PP5:
Example setting using [Cine1] gamma
PP6:
Example setting using [Cine2] gamma
PP7:
Example setting using [S-Log2] gamma

Items of the picture profile

Black Level
Sets the black level. (–15 to +15)

Gamma 
Selects a gamma curve.
Movie: Standard gamma curve for movies
Still: Standard gamma curve for still images
Cine1: Softens the contrast in dark parts and emphasizes gradation in bright parts to produce a relaxed color movie. (equivalent to HG4609G33)
Cine2: Similar to [Cine1] but optimized for editing with up to 100% video signal. (equivalent to HG4600G30)
ITU709: Gamma curve that corresponds to ITU709.
ITU709(800%): Gamma curve for confirming scenes on the assumption of shooting using [S-Log2].
S-Log2: Gamma curve for [S-Log2]. This setting is based on the assumption that the picture will be processed after shooting.

Black Gamma
Corrects gamma in low intensity areas.
Range: Selects the correcting range. (Wide / Middle / Narrow)
Level: Sets the correcting level. (-7 (maximum black compression) to +7 (maximum black stretch))

Knee
Sets knee point and slope for video signal compression to prevent over-exposure by limiting signals in high intensity areas of the subject to the dynamic range of your camera.
When selecting [Still], [Cine1], [Cine2], [ITU709(800%)], [S-Log2] in [Gamma], [Knee] is set to [Off] if [Mode] is set to [Auto]. To use functions in [Knee], set [Mode] to [Manual].
Mode: Selects auto/manual settings.
  • Auto: The knee point and slope are set automatically.
  • Manual: The knee point and slope are set manually.
Auto Set: Settings when [Auto] is selected for [Mode].
  • Max Point: Sets the maximum point of the knee point. (90% to 100%)
  • Sensitivity: Sets the sensitivity. (High/Mid/Low)
Manual Set: Settings when [Manual] is selected for [Mode].
  • Point: Sets the knee point. (75% to 105%)
  • Slope: Sets the knee slope. (-5 (gentle) to +5 (steep))

Color Mode
Sets type and level of colors.
Movie: Suitable colors when [Gamma] is set to [Movie].
Still: Suitable colors when [Gamma] is set to [Still].
Cinema: Suitable colors when [Gamma] is set to [Cine1].
Pro: Similar color tones to the standard image quality of Sony professional cameras (when combined with ITU709 gamma)
ITU709 Matrix: Colors corresponding to ITU709 standard (when combined with ITU709 gamma)
Black & White: Sets the saturation to zero for shooting in black and white.
S-Gamut: Setting based on the assumption that the pictures will be processed after shooting. Used when [Gamma] is set to [S-Log2].

Saturation
Sets the color saturation. (-32 to +32)

Color Phase
Sets the color phase. (-7 to +7)

Color Depth
Sets the color depth for each color phase. This function is more effective for chromatic colors and less effective for achromatic colors. The color looks deeper as you increase the setting value towards the positive side, and lighter as you decrease the value towards the negative side. This function is effective even if you set [Color Mode] to [Black & White].
[R] -7 (light red) to +7 (deep red)
[G] -7 (light green) to +7 (deep green)
[B] -7 (light blue) to +7 (deep blue)
[C] -7 (light cyan) to +7 (deep cyan)
[M] -7 (light magenta) to +7 (deep magenta)
[Y] -7 (light yellow) to +7 (deep yellow)

Detail
Sets items for [Detail].
Level: Sets the [Detail] level. (-7 to +7)
Adjust: The following parameters can be selected manually.
  • Mode: Selects auto/manual setting. (Auto (automatic optimization) / Manual (The details are set manually.))
  • V/H Balance: Sets the vertical (V) and horizontal (H) balance of DETAIL. (-2 (off to the vertical (V) side) to +2 (off to the horizontal (H) side))
  • B/W Balance: Selects the balance of the lower DETAIL (B) and the upper DETAIL (W). (Type1 (off to the lower DETAIL (B) side) to Type5 (off to the upper DETAIL (W) side))
  • Limit: Sets the limit level of [Detail]. (0 (Low limit level: likely to be limited) to 7 (High limit level: unlikely to be limited))
  • Crispning: Sets the crispening level. (0 (shallow crispening level) to 7 (deep crispening level))
  • Hi-Light Detail: Sets the [Detail] level in the high intensity areas. (0 to 4)

Copy
Copies the settings of the picture profile to another picture profile number.
MENU (Camera Settings) → [Picture Profile][Copy]

Reset
Resets the picture profile to the default setting. You cannot reset all picture profile settings at once.
MENU (Camera Settings) → [Picture Profile][Reset]

Note

  • Since the parameters are shared for movie and still images, adjust the value when you change the shooting mode.
  • If you print RAW images with shooting settings, the following settings are not reflected.
    • Black Level
    • Black Gamma
    • Knee
    • Color Depth
  • When the [Record Setting] is [120p 100M]/[100p 100M] or [120p 60M]/[100p 60M], [Black Gamma] is fixed at “0” and cannot be adjusted.
  • If you change [Gamma], the available ISO value range changes.
  • When using S-Log2 gamma, the noise becomes more noticeable compared to when using other gammas. If the noise still is significant even after processing pictures, it may be improved by shooting with a brighter setting. However, the dynamic range becomes narrower accordingly when you shoot with a brighter setting. We recommend checking the picture in advance by test shooting when using S-Log2.
  • Setting [ITU709(800%)] or [S-Log2] may cause an error in the white balance custom setup. In that case, set the exposure bright first and then perform custom setup.
  • Setting [ITU709(800%)] or [S-Log2] disables the [Black Level] setting.
  • If you set [Slope] to +5 in [Manual Set], [Knee] is set to [Off].
  • S-Gamut is a color space unique to Sony that provides a wide color space equivalent to film cameras. However, S-Gamut setting of this camera does not support the whole color space of S-Gamut; it is a setting to realize a color reproduction equivalent to S-Gamut.