Digital Still Camera DSC-RX10M2

Identifying parts

  1. ON/OFF (Power) switch
  2. Shutter button
  3. For shooting: W/T (zoom) lever
    For viewing: (Index) lever/Playback zoom lever
  4. Self-timer lamp/AF Illuminator
  5. Aperture index
  6. Lens
  7. Manual ring
  8. Exposure compensation dial
  9. Flash
  10. Multi interface shoe*
  11. Mode dial
  12. Hook for shoulder strap
  13. Focus mode dial
  14. Aperture ring

  1. (Display panel illumination) button
  2. Microphone
  3. Viewfinder
  4. Diopter-adjustment dial
  5. MOVIE (Movie) button
  6. (Flash pop-up) button
  7. Display panel
  8. C1 (Custom 1) button
  9. Hook for shoulder strap
  10. Memory card slot
  11. Memory card cover
  12. Access lamp

  1. MENU button
  2. Speaker
  3. (Microphone) jack
    • When an external microphone is connected, this product switches from the internal microphone to the external microphone. If the external microphone is a plug-in-power type, the power of the microphone is supplied by this product.
  4. (Headphones) jack
  5. Multi/Micro USB Terminal*
    • Supports Micro USB compatible device.
  6. HDMI micro jack
  7. Charge lamp
  8. Eye sensor
  9. Monitor
    • You can adjust the monitor to an easily viewable angle and shoot from any position.

  10. Control wheel
  11. Control dial
  12. For shooting: AEL (AE lock) button
    For viewing: (Playback zoom) button
  13. For shooting: Fn (Function) button
    For viewing: (Send to Smartphone) button
  14. For shooting: C2 (Custom 2) button
    For viewing: (Delete) button
  15. (Playback) button

  1. Aperture Click Switch
  2. Wi-Fi sensor (built-in)
  3. (N mark)
    • Touch the mark when you connect the camera to a smartphone equipped with the NFC function.
      For details on the location of the (N mark) on your Smartphone, refer to the operating instructions of the Smartphone.
    • NFC (Near Field Communication) is an international standard of the short-range wireless communication technology.
  4. Battery lock lever
  5. Battery insertion slot
  6. Connection plate cover
    Use this when using an AC-PW20 AC Adaptor (sold separately). Insert the connection plate into the battery compartment, and then pass the cord through the connection plate cover as shown below.

    • Make sure that the cord is not pinched when you close the cover.
  7. Battery cover
  8. Tripod socket hole
    • Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure this product, and damage to the product may occur.

*For details on compatible accessories for the multi interface shoe and the Multi/Micro USB Terminal, visit the Sony web site, or consult your Sony dealer or local authorized Sony service facility. You can also use accessories that are compatible with the accessory shoe. Operations with other manufacturers’ accessories are not guaranteed.

Go to Page Top