Adjusting the focus
-
Changing the focus method using the focus mode dial
You can select the focusing method to suit the movement of the subject.
-
Focus Area
Selects the focusing area. Use this function when it is difficult to get the proper focus in auto focus mode.
-
Phase detection AF
When there are phase detection AF points within the auto focus area, the product uses the combined autofocus of the phase detection AF and contrast AF.
-
Center Lock-on AF
When you press the center button, the camera detects the subject positioned in the center of the screen and continues to track the subject.
-
Focus-lock
Shoots images with the focus locked on the desired subject in auto focus mode.
-
Manual Focus
When it is difficult to get the proper focus in autofocus mode, you can adjust the focus manually.
-
Direct manual focus (DMF)
You can make fine adjustments manually after the focus is locked.
-
MF Assist (still image)
Enlarges the image on the screen automatically to make manual focusing easier. This works in Manual Focus or Direct Manual Focus shooting.
-
Focus Magnifier
You can check the focus by enlarging the image before shooting.
-
Focus Magnif. Time
Set the duration for which an image is to be magnified using the [MF Assist] or [Focus Magnifier] function.
-
Peaking Level
Enhances the outline of in-focus ranges using a specific color in Manual Focus or Direct Manual Focus shooting.
-
Peaking Color
Sets the color used for the peaking function in Manual Focus or Direct Manual Focus shooting.
-
Pre-AF (still image)
The product automatically adjusts focus before you press the shutter button halfway down.
-
AF/MF control
You can easily switch the focusing mode from auto to manual and vice versa while shooting without changing your holding position.
-
AF Illuminator (still image)
The AF illuminator supplies fill light to focus more easily on a subject in dark surroundings. The red AF illuminator allows the product to focus easily when the shutter button is pressed halfway, until the focus is locked.
-
Disp. cont. AF area
You can set whether or not to display the area that is in focus when [Focus Area] is set to [Wide], in [Continuous AF] mode.
-
Eye AF
The camera focuses on the subject's eyes while you keep the button pressed.
-
Phase Detect. Area
Sets whether or not to display the Phase Detection AF area.
- Measuring the exact distance to the subject
-
Priority Set in AF-S
Sets whether to release the shutter even if the subject is not in focus when [Focus Mode] or [Single-shot AF] is set to [DMF] and the subject is remaining still.
-
Priority Set in AF-C
Sets whether to release the shutter even if the subject is not in focus when [Continuous AF] is activated and the subject is in motion.