Digital Still Camera DSC-RX10M3

Aperture Priority

You can shoot by adjusting the aperture and changing the range in focus, or by defocusing the background. The aperture value can be changed while recording movies.

  1. Set the mode dial to A (Aperture Priority).
  2. Select the desired value by turning the aperture ring.
    • Smaller F-value: The subject is in focus, but objects in front of and beyond the subject are blurred.
      Larger F-value: The subject and its foreground and background are all in focus.
  3. Adjust the focus and shoot the subject.
    The shutter speed is automatically adjusted to obtain proper exposure.

Hint

  • Smaller F-value (opening the aperture) narrows the range that is in focus. This allows you to put the subject in sharp focus and blur objects in front of and beyond the subject (depth of field becomes shallower). Larger F-value (narrowing down the aperture) widens the range that is in focus. This allows you to shoot the depth of the scenery (depth of field becomes deeper).
  • You can change the click texture of the aperture ring using the Aperture Click Switch. When shooting still images, set the Aperture Click Switch to “ON,” and for movies, set it to “OFF.”

About the aperture ring

The maximum aperture depends on the focal length of the lens. You cannot open the aperture wider than the maximum even if you set a smaller F-value using the aperture ring. You can confirm the correct F-value on the display panel of the monitor.

Note

  • If proper exposure cannot be obtained after setup, the shutter speed on the shooting screen blinks. Although you can shoot as it is, resetting is recommended.
  • The brightness of the image on the screen may differ from the actual image being shot.
  • We recommend that you set the aperture value to between F2.4 and F8 if you want to shoot images with high resolution. Image quality may deteriorate due to the diffraction phenomenon.
Go to Page Top