DSC-J10 | Sweep Panorama | Cyber-shot User Guide

Top page > Shooting > Setting REC mode > Sweep Panorama

Sweep Panorama

Allows you to create a panorama image from composite images.

Set the mode switch to (Sweep Panorama).

Align the camera with the end of the subject to be shot and press the shutter button fully.

Pan the camera to the end of the guide (A), following the indication on the LCD screen.

Tips for shooting a panorama image

Pan the camera in an arc at a constant velocity in the direction indicated on the LCD screen. Subjects at rest are more suited for panorama shots than moving subjects.

Radius as short as possible.

Vertical direction

Horizontal direction

First, press the shutter button halfway so that you can lock the focus, exposure and white balance. Then, press the shutter button fully down and pan or tilt the camera.

If a section with greatly varied shapes or scenery is concentrated along a screen edge, the image composition may fail. In such case, adjust the frame composition so that the section is in the center of the image, then shoot again.

Notes

If in Panorama shooting excessive camera shake occurs shooting stops, and a gray area will appear in the composite image. Be sure to shoot without blur.

Since several images are stitched together, the stitched part will not be recorded smoothly.

Under low light conditions, panorama images may be blurred or the shooting may not be successful.

Under lights that flicker, such as fluorescent lights, the brightness or color of the combined image will not always be the same.

When the whole angle of panoramic shooting and the AE/AF locked angle are very different in brightness, color and focus, the shooting will not be successful. If this happens, change AE/AF locked angle and shoot again.

Sweep Panorama is not suitable for the following situations:

Moving subjects

Subjects are too close to the camera

Images with little contrast, such as sky, sandy beach or lawn

Images with constant changes, such as waves or waterfalls

You cannot create panorama images in the following situations:

You pan the camera too quickly.

There is too much camera shake.

You may not be able to set some functions or MENU items depending on the selected REC mode. For details, see “Functions not available in some REC modes” [Details] and “MENU items not available in some REC modes.” [Details]