DSC-J10 | Shooting still images / movies

Top page > Troubleshooting > Troubleshooting > Shooting still images / movies

Shooting still images / movies

Cannot record images.

Check the free capacity of the internal memory.

Delete unnecessary images. [Details]

You cannot record images while charging the flash.

Set the mode switch to (Still Image) when shooting still images.

Set the mode switch to (Movie) when shooting movies.

Smile Shutter function does not work.

No image is shot if a smiling face is not detected. [Details]

The image is out of focus.

The subject is too close. When shooting, make sure to position the lens farther away from the subject than the following minimum shooting distances:

In Intelligent Auto, and Easy Mode: Approximately 1 cm (13/32 inches) (W), 50 cm (19 3/4 inches) (T) from the lens.

In other recording modes: Approximately 8 cm (3 1/4 inches) (W), 50 cm (19 3/4 inches) (T) from the lens. Or set to Close focus mode and shoot about 1 cm to 20 cm (13/32 inches to 7 7/8 inches) from the W side.

(Landscape), (Twilight) or (Fireworks) mode is selected in the Scene Selection when shooting still images.

Zoom does not work.

You cannot use the optical zoom in Sweep Panorama mode.

You cannot use the Smart zoom depending on the image size. [Details]

You cannot use the digital zoom when:

The Smile Shutter is working.

[Self-Timer] is set to [Self-portrait One Person] or [Self-portrait Two People].

Cannot select the Face Detection function.

You can select Face Detection only when the focus mode is set to [Multi AF] and the metering mode is set to [Multi].

You cannot select Face Detection when the Close Focus mode is activated.

The flash does not work.

You cannot use the flash when:

Burst mode is selected. [Details]

(High Sensitivity), (Twilight) or (Fireworks) mode is selected in Scene Selection.

Shooting in Sweep Panorama mode.

Shooting in Movie Mode.

Set the flash to (On) when the Scene Selection mode is set to (Landscape), (Gourmet), (Pet), (Beach) or (Snow) mode. [Details]

Fuzzy white circular spots appear in images shot using the flash.

Particles (dust, pollen, etc.) in the air reflected the flash light and appeared in the image. This is not a malfunction. [Details]

The close-up shoot function (Macro/Focus On) does not work.

(Landscape), (Twilight) or (Fireworks) mode is selected in the Scene Selection.

When Close Focus mode is selected, the shooting distance is approximately 1 cm to 20 cm (13/32 inches to 7 7/8 inches).

[Macro] is set to [Auto] in the following situations:

In Movie Mode

When the Smile Shutter function is activated.

In Easy Mode

In Sweep Panorama

When [Self-Timer] is set to [Self-portrait One Person] or [Self-portrait Two People].

The date and time are not displayed on the LCD screen.

While shooting, the date and time are not displayed. They are displayed only during playback.

Cannot insert dates on images.

This camera does not have a feature for superimposing dates on images. By using “PMB”, you can print or save images with the date. [Details]

The F value and shutter speed flash when you press and hold the shutter button halfway down.

The exposure is incorrect. Correct the exposure. [Details]

The image colors are not correct.

Adjust the White Balance. [Details]

White or purple streaks appear in bright areas of the subject, or the whole screen of the image becomes reddish.

This phenomenon is called smearing. This is not a malfunction. Smearing is not recorded on still images, but is recorded as streaks or uneven colors on Sweep Panorama images or movies.
(“Bright areas” refers to the sun or electric lights which are much brighter than surroundings.)

Noise appears in the image when you view the screen in a dark place.

The camera is attempting to increase the visibility of the screen by temporarily brightening the image under conditions of low illumination. There is no effect on the recorded image.

The eyes of the subject come out red.

Set [Red Eye Reduction] to [Auto] or [On]. [Details]

Shoot the subject at a distance closer than the flash range using the flash.

Light the room and shoot the subject.

Retouch the image using [Retouch] [Red Eye Correction] in viewing menu [Details], or correct using “PMB”. [Details]

Dots appear and remain on the screen.

This is not a malfunction. These dots are not recorded.

Cannot shoot images in succession.

The internal memory is full. Delete unnecessary images. [Details]

The battery level is low. Charge the camera.

The same image is shot several times.

Set [Burst Settings] to [Single]. [Details]

[Scene Recognition] is set to [Advanced]. [Details]

While charging the Power/Charge lamp flashes.

If you charge the battery pack which has not been used for a long time, the Power/Charge lamp may flash.

The battery is not charged even after the Power/Charge lamp turned off.

This phenomenon occurs when you charge the camera in an extremely hot or cold location. Charging the battery in an ambient temperature of 10°C to 30°C (50°F to 86°F) is recommended.