Batteries and power

• This phenomenon occurs when you use the camera in an extremely hot or cold location.

• When using alkaline batteries / Oxy Nickel Primary Battery (sold separately), the remaining-charge indicator may not be correct.

• The batteries are discharged. Insert new batteries or charged Nickel-Metal Hydride batteries (sold separately).

• When using the Nickel-Metal Hydride batteries (sold separately), the poles of batteries or the terminals of the battery cover are dirty so the batteries are not charged sufficiently. Clean them with a cotton swab, etc..

• When using the Nickel-Metal Hydride batteries (sold separately), the remaining-charge indicator differs from the current one due to the memory effect, etc. Fully discharge and then charge the batteries to correct the display.

• The batteries are dead. Replace them with new ones.

• You are using the camera in an extremely cold location.

• The batteries are dead. Replace them with new ones.

• When using the Nickel-Metal Hydride batteries (sold separately), charge them sufficiently.

• This is not a malfunction. Turn off the camera before you open the battery / memory card cover.

• Insert the batteries correctly.

• The batteries are discharged. Insert new batteries or charged Nickel-Metal Hydride batteries (sold separately).

• The batteries are dead. Replace them with new ones.

• When [Power Save] is set to [Standard] or [Stamina], if you do not operate the camera for a certain period of time while the power is on, the camera turns off automatically to prevent wearing down the batteries. Turn on the camera again.

• The batteries are discharged. Insert new batteries or charged Nickel-Metal Hydride batteries (sold separately).

Back to top