Shooting still images/movies
-
If images are recorded on the internal memory even when a memory card is inserted into the camera, make sure that the memory card is fully inserted into the camera.
-
Check the free capacity of the internal memory or memory card. If it is full, do one of the following:
-
Delete unnecessary images. [Details]
-
Change the memory card.
-
You cannot record images while charging the flash.
-
When recording movies, it is recommended that you use the following memory cards:
-
“Memory Stick PRO Duo” (Mark2) media, “Memory Stick PRO-HG Duo” media
-
SD memory card, SDHC memory card or SDXC memory card (Class 4 or faster)
-
Set [Demo Mode] to [Off]. [Details]
-
No image is shot if a smiling face is not detected. [Details]
-
Set [Demo Mode] to [Off]. [Details]
-
The anti-blur function may not work properly when shooting night scenes.
-
Shoot after pressing the shutter button halfway down.
-
When the shutter speed becomes slower than a certain speed, for example, when you shoot images in dark locations, the camera automatically reduces the image noise. This function is called NR (noise reduction) slow shutter and the shooting time takes longer.
-
The subject is too close. When shooting, make sure to position the lens farther away from the subject than the shortest shooting distance (approximately 5 cm (2 inches) (W)/1 m (3 ft 3 3/8 inches) (T) from the lens).
-
(Landscape), (Night Scene) or (Fireworks) mode is selected in the Scene Selection when shooting still images.
-
You cannot use the optical zoom when:
-
Shooting in Intelligent Sweep Panorama mode
-
Shooting in 3D Sweep Panorama mode
-
Shooting in Sweep Multi Angle mode
-
You cannot use zoom functions other than optical zoom when:
-
Shooting in Background Defocus mode
-
Shooting in Picture Effect
-
(Backlight Correction HDR) mode is selected in the Scene Selection
-
Shooting in 3D mode
-
The Smile Shutter is working.
-
When [Self-Timer] is set to [Self-portrait One Person] or [Self-portrait Two People].
-
You can select Face Detection only when the focus mode is set to [Multi AF] and the metering mode is set to [Multi].
-
You cannot use the flash when:
-
Shooting in Background Defocus mode
-
Burst mode is selected. [Details]
-
(Anti Motion Blur) mode, (Night Scene) mode, (Hand-held Twilight) mode, (High Sensitivity) mode or (Fireworks) mode is selected in Scene Selection.
-
Shooting in Intelligent Sweep Panorama mode
-
Shooting in 3D mode
-
Shooting in movie mode
-
Set the flash to [On] when Picture Effect is selected or when Scene Selection mode is set to (Landscape), (Backlight Correction HDR), (Gourmet), (Pet), (Beach) or (Snow) mode. [Details]
-
Particles (dust, pollen, etc.) in the air reflected the flash light and appeared in the image. This is not a malfunction. [Details]
-
The camera automatically adjusts the focus. Press and hold the shutter button halfway down. Focus adjustment may take some time when shooting a close subject.
-
(Landscape), (Night Scene) or (Fireworks) mode is selected in the Scene Selection.
-
While shooting, the date and time are not displayed. They are displayed only during playback.
-
The exposure is incorrect. Correct the exposure. [Details]
-
Picture Effect is selected. [Details]
-
Adjust [White Balance]. [Details]
-
The camera is attempting to increase the visibility of the screen by temporarily brightening the image under conditions of low illumination. There is no effect on the recorded image.
-
Depending on the brightness of the subject, you may see a dark shadow when you change the aperture. This is not a malfunction.
-
Set [Red Eye Reduction] to [Auto] or [On]. [Details]
-
Shoot the subject at a distance closer than the flash range using the flash.
-
Light the room and shoot the subject.
-
Retouch the image using [Retouch] [Red Eye Correction] in viewing menu [Details], or correct using “PMB”. [Details]
-
This is not a malfunction. These dots are not recorded.
-
You cannot shoot images in succession while the Smile Shutter function is activated.
-
The internal memory or memory card is full. Delete unnecessary images. [Details]
-
The battery level is low. Insert a charged battery pack.
-
Set [Cont. Shooting Settings] to [Off]. [Details]
-
[Scene Recognition] is set to [Advanced]. [Details]
-
If you touch , all indicators will disappear. Touch on the right of the screen for few seconds.
-
While you touch the upper right of the screen during shooting images, the buttons or icons are temporarily turned off. The buttons and icons will reappear when your fingers move away from the screen.