Position Information (DSC-TX300V only)
The GPS triangulating status can be checked. Set the camera to triangulate when the position information is being displayed.
-
MENU
(Position Information)
![](../../../common/commonillusts/yit/c0229_tch_menu/c0229_tch_menu.jpg)
Displays the triangulating information on the screen.
![](../../../../partimages/sc_posinfo_01gb.jpg)
On the GPS indicators
The indicator (A) changes according to the strength of GPS signal reception when GPS is activated.
GPS indicators
|
Triangulating status
|
GPS reception status
|
No indicator
|
Off
|
[GPS setting] is set to [Off] or an error occurred.
|
![]() |
Difficult
|
Your camera cannot find a GPS signal, therefore, it cannot acquire the location information. Use your camera in an open area.
|
![]() ![]() ![]() |
Searching
|
Searching for GPS satellites. It may take several minutes to start triangulating.
|
![]() ![]() ![]() |
Triangulating
|
During GPS triangulating, displays latitude / longitude (B).
|
Satellite and positioning indicators
Satellite position and acquiring status of orbital information (C) can be checked on the position information display. Up to 4 indicators which show satellite information-acquiring status are displayed on the positioning indicator (D).
The color of satellite indicator and positioning indicator change according to the positioning status. Green-colored indicator shows that camera is triangulating.
Notes
-
Even when the camera aquires information from satellites, triangulation may take time or fail according to the time or place.
-
In searching the satellite positions, or triangulating, its may fail when you put your fingers on the GPS receiver.
Related Topic