Before Use
Viewing 3D images on a 3D TV
-
Turn off both the camera and the TV.
-
Connect the HDMI connector of the camera (A) and the HDMI jack (B) using an HDMI Cable (sold separately) (C).
-
Turn on the TV and set the input.
-
Press the ON/OFF (Power) button.
-
Touch
(Playback).
-
Touch
/ 
to select images shot using 
(3D Shooting) mode.
-
Touch
(3D Viewing).
-
Touch [OK].
-
Touch
/ to select the images and select the desired mode.
|
Scroll Playback panorama image.
|
Plays back scrolling images shot in 3D Sweep Panorama mode. Touch
 to play back/pause and  / to scroll the images.
|
|
Continuous Playback
|
Continuously plays back only 3D images. Touch
/ to change the image to the next/previous one. |
|
Exit 3D Viewing
|
Ends 3D playback.
|
-
You can change the zoom scale for 3D still images using the W/T (zoom) lever.
-
When you select [3D Viewing] mode, only 3D images are displayed.
-
If you play back an image shot in [3D Sweep Panorama] mode with the shooting direction set to up or down, the image is played back horizontally on the TV.
-
Do not connect the camera and equipment to be connected using output terminals. When the camera and equipment are connected using output terminals, no video and sound are produced. Such a connection can also cause trouble of the camera and/or connected equipment.
-
This function may not work properly with some TVs. For example, you may not be able to view a video on your TV, output in 3D mode or hear sound from the TV.
-
Use an HDMI Cable with the HDMI logo.
-
When connecting the camera to a TV, use an HDMI Cable that can be connected to the micro jack on the camera end and to the TV jack. You cannot view images on a TV that does not have an HDMI connector.
-
Recording may automatically stop to protect the camera after a period of time when you shoot movies in the condition where the camera and TV are connected by an HDMI Cable (sold separately).
