Overall operations/Wireless Remote Commander

• Attach a charged battery pack to the camcorder. [Details]

• The plug of the AC Adaptor has been disconnected from the wall outlet (wall socket). Connect it to the wall outlet (wall socket). [Details]

• It takes a few seconds for your camcorder to be ready to shoot after the power is turned on. This is not a malfunction.

• Disconnect the AC Adaptor from the wall outlet (wall socket) or remove the battery pack, then reconnect it after about 1 minute. If the functions still do not work, press RESET using a pointed object. (If you press RESET, all settings, including the clock setting, are reset. [Details])

• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place.

• The temperature of your camcorder is extremely low. Leave your camcorder with the power of your camcorder on. Turn off your camcorder and take it to a warm place. Leave the camcorder there for a while, then turn on your camcorder.

• While Intelligent Auto is active, some menu settings related to image quality will be changed automatically.

• The following menu items return to the default settings when you switch between movie recording and photo recording and playback modes.

• [ Fader]

• [ Self-Timer]

• [ Tele Macro]

• Your camcorder may become warm during operation. This is not a malfunction.

• If no noise is heard when the camcorder is turned on and is in the movie/photo recording mode, the noise is produced by the movement of the internal lens. This is not a malfunction.

• The Intelligent Auto setting is canceled if you change the following settings:

• [Smth Slw REC]

• [Golf Shot]

• [White Balance]

• [Spot Meter/Fcs]

• [Spot Meter]

• [Spot Focus]

• [Exposure]

• [Focus]

• [IRIS]

• [Shutter Speed]

• [AGC Limit]

• [AE Shift]

• [White Balance Shift]

• [Low Lux]

• [Scene Selection]

• [Cinematone]

• [Auto Wind NR]

• [Tele Macro]

• [SteadyShot]

• [SteadyShot]

• [Auto Back Light]

• [Face Detection]

• Set [Remote Ctrl] to [On]. [Details]

• Insert a battery into the battery holder with the +/– polarities correctly matching the +/– marks. [Details]

• Remove any obstructions between the Wireless Remote Commander and the remote sensor.

• Point the remote sensor away from strong light sources such as direct sunlight or overhead lighting. Otherwise, the Wireless Remote Commander may not function properly.

• Select a commander mode other than DVD 2 for your DVD device, or cover the sensor of your DVD device with black paper.