If you have problems

1. Check the items under “Troubleshooting”, and inspect your camcorder.

If a code such as “C:(or E:) :” appears on the screen, see “Self-diagnosis display/Warning indicators”.

2. Disconnect the power source, attach the power source again after about 1 minute, and turn the camcorder on.

3. Press RESET using a pointed object, and turn the camcorder on. [Details]

• If you press RESET, all settings, including the clock setting, are reset.

4. Contact your Sony dealer or local authorized Sony service facility.

• Your camcorder may be required to initialize or change the current internal memory (HDR-CX740VE/ CX760E/ CX760VE/ PJ710VE/ PJ720E/ PJ740VE/ PJ760E/ PJ760VE) of your camcorder, depending on the problem. In the event of this, the data stored on the internal memory will be deleted. Be sure to save the data on the internal memory on other media (backup) before sending your camcorder for repair. We will not compensate you for any loss of internal memory data.

• During repair, we may check a minimum amount of data stored on the internal memory in order to investigate the problem. However, your Sony dealer will neither copy nor retain your data.