Eye-Fi
-
MENU
(Settings)
(Main Settings)
[Eye-Fi]
desired mode
![]() |
On
|
Uses the upload function.
The Eye-Fi mode display icon on the screen will change depending on the communication mode of the Eye-Fi card.
![]() ![]() ![]() ![]() ![]() |
|
Off
|
Does not use the upload function.
|
-
As of November 2011, Eye-Fi cards are sold in the U.S.A., Canada, Japan and some countries in the European Union.
-
For more information on the Eye-Fi card, contact the manufacturer or seller of Eye-Fi cards directly.
-
Eye-Fi cards are permitted only in the countries and regions in which they were purchased. You may be held liable due to local restrictions.
-
The Eye-Fi card has a wireless LAN function. Do not insert the Eye-Fi card where wireless LAN is prohibited, such as while aboard an airplane. If the Eye-Fi card is inserted, set [Eye-Fi] to [Off]. When the uploading function of the Eye-Fi card is set to [Off],
is displayed on the screen.
Transferring image data using the Eye-Fi card
-
Set the wireless LAN access point settings or the transferring direction settings of the Eye-Fi card.
-
After the settings are finished, insert the Eye-Fi card into the camera, and shoot the images.
-
When uploading image data, [Eco Mode] is not available.
-
If the
(error) icon is displayed, eject and re-insert the Eye-Fi card, or turn the power of the camera off and on again. If the
(error) icon is still displayed, the Eye-Fi card may be corrupted. For details, contact Eye-Fi, Inc.
-
Wireless LAN communication may be interrupted by the other communication devices. If data reception is insufficient, move the camera closer to the access point.
-
Some Eye-Fi cards have an “Endless Memory Mode.” This product does not support “Endless Memory Mode.” Make sure that Eye-Fi cards that you insert into this product have “Endless Memory Mode” turned off. For details on setting “Endless Memory Mode”, refer to the operating instructions supplied with the Eye-Fi card.