GPS setting (DSC-HX50V)
-
MENU (Settings) (Main Settings) [GPS setting] desired mode
|
On
|
GPS setting is activated.
|
|
Off
|
GPS setting is inactivated.
Set this to not record location information.
|
-
Proper triangulation is not possible indoors or near tall buildings. Use your camera in an open area outside, and turn on your camera again.
-
If no triangulation icon appears, even if you wait for several minutes, you may be in an area where GPS signal reception is difficult or impossible. Begin shooting where you are, or move to an open area outside. If you shoot where you are, no location information will be recorded.
-
During take off and landing of an airplane, set [Airplane Mode] to [On].
-
Use GPS in accordance with the regulations of the place or situation.
-
It may take from several tens of seconds to several minutes to acquire the location information when you use the GPS for the first time or use it again after long intervals. Triangulating time can be shortened by taking in GPS assist data. [Details]
-
Do not cover the GPS sensor with your finger when searching for GPS satellites or when triangulating. This decreases the sensitivity of the GPS sensor and triangulation may fail.
Checking triangulating status
Triangulating status
|
GPS indicators
|
GPS reception status
|
Off
|
No indicator
|
[GPS setting] is set to [Off] or an error occurred.
|
Difficult
|
|
Your camera cannot find a GPS signal, therefore, it cannot acquire the location information. Use your camera in an open area.
|
Searching
|
|
Searching for GPS satellites. It may take several minutes to start triangulating.
|
Triangulating
|
|
Your camera is receiving a GPS signal, and can acquire location information.
|