HDR-TD30/TD30V | Creating a standard definition image quality (STD) disc with a recorder

Top page > Saving images with an external device > Creating a disc with a recorder > Creating a standard definition image quality (STD) disc with a recorder

Creating a standard definition image quality (STD) disc with a recorder

Connect your camcorder to a disc recorder with the A/V connecting cable (sold separately). You can copy images played back on your camcorder on a disc or video cassette.

Insert the recording medium in the recording device (a disc recorder, etc.).

If your recording device has an input selector, set it to the input mode.

Connect your camcorder to the recording device with the A/V connecting cable (sold separately).

A: A/V Remote Connector

B: A/V connecting cable

: Signal flow

Connect your camcorder to the input jacks of the recording device.

Start playback on your camcorder, and record it on the recording device.

When dubbing is finished, stop the recording device, and then your camcorder.

Notes

3D movies are converted to 2D with standard definition image quality (STD).

You cannot copy images to recorders connected with an HDMI cable.

Since copying is performed via analog data transfer, the image quality may deteriorate.

High definition image quality (HD) movies will be copied with standard definition image quality (STD).

When you connect a monaural device, connect the yellow plug of the A/V connecting cable (sold separately) to the video input jack, and the white (left channel) or the red (right channel) plug to the audio input jack on the device.