WPS Push

If your access point has the WPS button, you can register the access point to the camera easily by pushing the WPS button.
  1. MENU (Settings) (Network Settings) [WPS Push]

  1. Press the WPS button on the access point you want to register.

Notes
  • To use [WPS Push], the security of your access point has to be set to WPA2 or WPA, and support the WPS push button system. In other cases, such as where security is set to WEP or the WPS push button system is not supported, register the access point manually. [Details]

  • For details on the functions and settings of your access point, refer to the instruction manual of the access point, or contact the person who is managing the access point.

  • Connection may not be established or communication distance may be shorter depending on the surrounding environment, such as obstacles between the camera and the access point, obstacle/wall materials, radio wave conditions, etc. In such cases, change the location of the camera or move the camera closer to the access point in.

Related Topic