Batteries/power sources
-
Use the AC Adaptor.
-
In the default setting, when about 2 minutes have elapsed while you do not operate your camcorder, the camcorder is automatically turned off. Change the setting of [Power Save], or turn on the power again. [Details]
-
Charge the battery pack. [Details]
-
Close the LCD screen. [Details]
-
Attach the battery pack to the camcorder correctly. [Details]
-
Connect the power cord (mains lead) to the wall outlet (wall socket) properly.
-
The battery charge is completed. [Details]
-
When the battery is being charged using the USB Cable, disconnect the USB Cable and connect it again.
-
If the temperature of the battery pack is too high or too low, you may not be able to charge it. [Details]
-
Attach the battery pack to the camcorder correctly. If the problem persists, disconnect the AC Adaptor from the wall outlet (wall socket) and contact your Sony dealer. The battery pack may be damaged. [Details]
-
The ambient temperature is too high or too low. This is not a malfunction.
-
The battery pack has not been charged enough. Fully charge the battery again. If the problem persists, replace the battery pack with a new one. [Details]
-
The indicated time may not be correct depending on the environment of use.
-
The ambient temperature is too high or low. This is not a malfunction.
-
The battery pack has not been charged enough. Fully charge the battery again. If the problem persists, replace the battery pack with a new one. [Details]