Self-diagnosis display

C:(or E:) : (Self-diagnosis display)

C:06:

• The battery pack temperature is high. Change the battery pack or place it in a cool place.

C:13: / C:32:

• Remove the power source. Reconnect it and operate your camcorder again.

E::

• Follow the steps from 2 on “If you have problems”.

(Battery level warning)

• The battery pack is nearly used up.

(Warning indicator pertaining to battery pack temperature)

• The battery pack temperature is high. Change the battery pack or place it in a cool place.

(Warning indicator pertaining to memory card)

• Free spaces for recording images are running out. For the type of memory card you can use with your camcorder, see “Types of memory card you can use with your camcorder”.

• No memory card is inserted. [Details]

• There are not enough free spaces for recording images. After storing the images on other media, delete unnecessary images, or format the memory card. [Details] [Details]

• The image data base file may be damaged.
  Check the data base file by selecting [Setup] [Media Settings] [Repair Img. DB F.] the recording medium (HDR-GWP88/ GWP88E/ GWP88V/ GWP88VE).

• The memory card is damaged.

(Warning indicators pertaining to memory card formatting)

• The memory card is damaged.

• The memory card is not formatted correctly. [Details]

(Warning indicator pertaining to incompatible memory card)

• Incompatible memory card is inserted. [Details]

(Warning indicator pertaining to the write-protect of the memory card)

• Access to the memory card was restricted on another device.

(Warning indicator pertaining to the flash)

• There is something wrong with the flash.

(Warning indicator pertaining to camera-shake warning)

• The amount of lights is not sufficient, so camera-shake easily occurs. Use the flash.

• The camcorder is unsteady, so camera-shake easily occurs. Hold the camcorder steady with both hands and record the image. However, note that the camera-shake warning indicator does not disappear.

(Warning indicator pertaining to photo recording)

• The recording media is full.

• Photos cannot be recorded during processing. Wait for a while, then record.

• When [REC Mode] is set to [Highest Quality ], [60p Quality ] (HDR-GW66V/ GWP88/ GWP88V) or [50p Quality ] (HDR-GW66E/ GW66VE/ GWP88E/ GWP88VE), you cannot capture photos while recording movies.

(Warning indicator for the SELF-REC button)

• You can operate the SELF-REC button only when the LCD panel is rotated 270 degrees to the lens side. Select [Setup] [General Settings] [[SELF-REC] Button] [Always Active] to enable to operate the SELF-REC button all the time.