Other

There is no beep sound when your “WALKMAN” is operated.
  • [Beep Settings] is set to [Off].

  • The beep does not sound when your Walkman is connected to the cradle (not supplied), or another device.

Your “WALKMAN” gets warm.
  • Your Walkman may become warm when the battery is being charged and just after charging. The Walkman also may get warm when a large amount of data is transferred. This behavior is normal and not cause for a concern. Set the Walkman aside for a while to allow it to cool down.

The date and time have been reset.
  • If you left your Walkman for a while with the battery used up, the date and time may be reset. This is not a malfunction. Charge the battery until appears on the screen, and set the date and time again [Details].

Noise is generated when plugging or unplugging the headphones.
  • Take off the headphones when plugging or unplugging the headphones. If you plug or unplug the headphones while playing a song, you may hear noise from the headphones. This is not a malfunction.

The alarm does not function.
  • When setting the alarm, the setting was stopped halfway or your Walkman was turned off without confirming the setting of the hour and minutes.

  • The alarm does not function while your Walkman is connected to a computer.

  • Disconnect the USB cable.

  • The remaining battery power is low or insufficient.

  • Charge the battery by connecting your Walkman to a running computer [Details].

The alarm does not go off.
  • The alarm will not sound in the following situations.

  • Connected to a computer.

The sleep timer does not work.
  • The sleep timer will be canceled in the following situations.

  • Entering standby mode.

  • Connecting your Walkman to a computer.