Batteries and power

• This phenomenon occurs when you use the camera in an extremely hot or cold location.

• When using alkaline batteries (sold separately), the remaining charge indicator may not be correct.

• The batteries are discharged. Insert new batteries or charged Nickel-Metal Hydride batteries (sold separately).

• When using the Nickel-Metal Hydride batteries (sold separately), the remaining charge indicator may differ from the current one due to the memory effect, etc. Fully discharge and then charge the batteries to correct the display.

• You are using the camera in an extremely cold location.

• The batteries are dead. Replace them with new ones.

• When using the Nickel-Metal Hydride batteries (sold separately), charge them sufficiently. If the poles of batteries or the terminals of the camera are dirty, the batteries may not charge properly. Clean the poles and terminals with a cotton swab, etc.

• This is not a malfunction. Turn off the camera before you open the battery/memory card cover.

• Insert the batteries correctly.

• The batteries are discharged. Insert new batteries or charged Nickel-Metal Hydride batteries (sold separately).

• The batteries are dead. Replace them with new ones.

• When [Power Save] is set to [Standard] or [Max], and you do not operate the camera for a certain period of time while the power is on, the camera turns off automatically to prevent wearing down the batteries. Turn on the camera again.

• The batteries are discharged. Insert new batteries or charged Nickel-Metal Hydride batteries (sold separately).