Digital Still CameraDSC-W810

Shooting panoramic images

You can create a panoramic image from composite images.

  1. Open the menu and select (Sweep Panorama) from the shooting modes.
  2. Align the camera with the end of the subject to be shot and press the shutter button fully.

  3. Pan the camera to the end of the guide (A), following the indicator on the screen.

Tips for shooting a panoramic image

Pan the camera in an arc at a constant velocity in the direction indicated on the screen.

Subjects at rest are more suited for panoramic shots than moving subjects.

Radius as short as possible.

Vertical direction

Horizontal direction

  • First press the shutter button halfway so that you can lock focus and exposure. Then press the shutter button fully down and pan or tilt the camera.
  • If a section with greatly varied shapes or scenery is concentrated along a screen edge, the image composition may fail. In such a case, adjust the frame composition so that the section is in the center of the image, then shoot again.

To shoot a 360 degree panoramic image

This camera is equipped with a panorama shooting function, capable of shooting a nearly 360 degree panoramic image.

Shoot a panoramic image by selecting MENU - set [Panorama Image Size] to [360°]. Recorded panoramic images can be scrolled normally when played on the camera.

Press MENU - [Shooting Direction] - select [Right] or [Left]. [Up] and [Down] cannot be selected for [Shooting Direction] when shooting 360 degree panoramic images.

The image actually recorded may not cover 360 degrees, depending on the subject or the way it is shot.

Note

  • If you cannot pan the camera across the entire subject within the given time, a gray area occurs in the composite image. If this happens, move the camera faster to record a full panoramic image.
  • Since several images are stitched together, the stitched part will not be recorded smoothly.
  • When the whole angle of panoramic shooting and the AE/AF locked angle are very different in brightness, color and focus, the shooting will not be successful. If this happens, change the AE/AF locked angle and shoot again.
  • You cannot create panoramic images in the following situations:
    • You pan the camera too quickly or too slowly.
    • There is too much camera shake.
Go to Page Top

Related Topic

Go to Page Top