Manual Exposure
You can shoot with the desired exposure setting by adjusting both the shutter speed and aperture.
- Set the mode dial to M (Manual Exposure).
-
Press the bottom side of the control wheel to select the shutter speed or aperture value, then turn the control wheel to select a value.
Check the exposure value at “MM” (metered manual).
Toward +: Images become brighter.
Toward − : Images become darker.
0: Appropriate exposure analyzed by the product - Adjust the focus and shoot the subject.
Note
- [ISO AUTO] cannot be selected for [ISO] in manual exposure mode.
- In manual exposure mode, the [ISO AUTO] setting under [ISO] is switched to the minimum ISO sensitivity. Change the ISO value to your desired setting if necessary.
- When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes.
- The (SteadyShot warning) indicator does not appear in manual exposure mode.
- The brightness of the image on the monitor may differ from the actual image being shot.