- Top Page >
- Parts Description >
- Back
Back
![](../share/res_common/i_ptv_Tback_pre.full.png)
- LAN
- PC IN
- HDMI IN 1/4
- DIGITAL AUDIO OUT (OPTICAL)
- AUDIO OUT (VAR/FIX)
- VIDEO IN 1, COMPONENT IN 1/2
- CABLE/ANTENNA
- LAN
Connects to an existing network using an Ethernet cable.
- PC IN
Connects to a personal computer’s video and audio output connector. Can also be connected to other analog RGB equipment.
- For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If this is the case, connect the adapter to the computer before connecting the HD15-HD15 cable.
- It is indispensable to use a PC cable with ferrite cores.
- HDMI IN 1/4
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between this TV and any HDMI-equipped audio/video equipment. In addition, when you connect the equipment that is compatible with “Control for HDMI,” communication with the connected equipment is supported.
- Be sure to use only an authorized HDMI cable bearing the HDMI logo.
- If connecting a digital audio system that is compatible with Audio Return Channel (ARC) technology, use the HDMI IN 1. If not, an additional connection with DIGITAL AUDIO OUT (OPTICAL) is necessary.
- If the equipment has a DVI jack, connect it to the HDMI IN 4 through a DVI - HDMI adapter interface (not supplied), and connect the equipment’s audio out jacks to the PC/HDMI 4 AUDIO IN which is located in the PC IN.
- DIGITAL AUDIO OUT (OPTICAL)
Connects to the optical audio input of digital audio equipment that is PCM/Dolby Digital compatible.
- AUDIO OUT (VAR/FIX)
Connects to the left and right audio input jacks of your analog audio equipment. You can use these outputs to listen to your TV’s audio through your stereo system.
- VIDEO IN 1, COMPONENT IN 1/2 (1080p/1080i/720p/480p/480i)
This input can be used as a composite video input or as a component video input.
For composite use, connect to VIDEO IN 1 for video, and to AUDIO (L/R) of COMPONENT IN 1 for audio signals.
For component connection, use Y, PB, PR for video signals and also connect to AUDIO (L/R) for audio signals.
- The TV will automatically detect and switch between VIDEO IN 1 and COMPONENT IN 1. To manually set the input type, press
, select
> Channels & Inputs > Video 1/Component 1 Selection.
- The TV will automatically detect and switch between VIDEO IN 1 and COMPONENT IN 1. To manually set the input type, press
- CABLE/ANTENNA
RF input that connects to your cable or over-the-air antenna.