Top Page > “BRAVIA” TV Features > Wireless LAN Ready

Wireless LAN Ready

Provides a wireless network connection for your TV by inserting a USB Wireless LAN Adapter into your TV’s USB port.

By inserting the USB Wireless LAN Adapter UWA-BR100 (as of December 2010) into your TV’s USB port, you can create a wireless network connection.

Internet

Modem

Wireless router
(access point)

USB Wireless LAN Adapter

The USB Wireless LAN Adapter is supplied or available as an optional accessory, depending on your TV model. In some regions/countries, the USB Wireless LAN Adapter may not be available.
If your TV has two USB ports, be sure to connect the USB Wireless LAN Adapter to the upper USB port.

Connecting to your wireless LAN

Set up your wireless router (or access point).

For details, refer to the instruction manual of your wireless router (or access point).
Check your wireless LAN environment using the following chart.

Tip for smooth video streaming: Change the setting of your wireless router (or access point) to 802.11n and 5GHz if possible. For details on how to change the setting, refer to the instruction manual of your wireless router (or access point).

Do you use a secure wireless LAN?

YES →

Do you use a wireless router (or access point) compatible with Wi-Fi Protected Setup (WPS)?

YES →

If your wireless router (or access point) has a WPS button, proceed to TYPE 1.

If your wireless router (or access point) has a PIN code, proceed to TYPE 2.

If your wireless router (or access point) has both a WPS button and PIN code, proceed to TYPE 1.

NO
↓

Proceed to TYPE 4.

Proceed to TYPE 3.

Check the WPS button location on your wireless router (or access point) and verify how to use it.
Press , then select → [Network] → [Network Set-up].
The start-up screen appears.
Select [Wireless Set-up] → [WPS (Push Button)], then follow the on-screen instructions.

Press , then select → [Network] → [Network Set-up].
The start-up screen appears.
Select [Wireless Set-up] → [WPS (PIN)], then follow the on-screen instructions.

Check the SSID (wireless network name) and security key (WEP or WPA key) of your wireless router (or access point).
If you do not know them, refer to the instruction manual of your wireless router (or access point).
Press , then select → [Network] → [Network Set-up].
The start-up screen appears.
Select [Wireless Set-up] → [Scan].
Select a network from the list of scanned wireless networks, then follow the on-screen instructions.

Check the SSID (wireless network name).
If you do not know the SSID, refer to the instruction manual of your wireless router (or access point).
Press , then select → [Network] → [Network Set-up].
The start-up screen appears.
Select [Wireless Set-up] → [Scan].
Select a network from the list of scanned wireless networks, then follow the on-screen instructions.