- Top Page >
- Parts Description >
- Bottom
Bottom
LAN
- VIDEO/
COMPONENT IN - HDMI IN 1/4
- LAN
Connects to an existing network using an Ethernet cable.
-
RF input that connects to your cable or antenna (aerial).
- VIDEO/COMPONENT IN
You need to use the supplied adaptor cable.
This input can be used as a composite video input or as a component video input. When connecting mono equipment, connect to the L (MONO) jack (socket).
- The TV will automatically detect and switch between VIDEO IN and COMPONENT IN. To manually set the input type, press
, select 
→ [External Inputs] → [Video 2/Component Input].
- The TV will automatically detect and switch between VIDEO IN and COMPONENT IN. To manually set the input type, press
- HDMI IN 1/4
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between this TV and any HDMI-equipped audio/video equipment. In addition, when you connect equipment that is compatible with “Control for HDMI”, communication with the connected equipment is supported.
- Be sure to use only an authorised HDMI cable bearing the HDMI logo.
- If connecting a digital audio system that is compatible with Audio Return Channel (ARC) technology, use HDMI IN 1. If not, an additional connection with DIGITAL AUDIO OUT (OPTICAL) is necessary.
- If the equipment has a DVI jack (socket), connect it to HDMI IN 4 through a DVI - HDMI adaptor interface (not supplied), and connect the equipment’s audio out jacks (sockets) to PC/HDMI 4 AUDIO IN which is located in PC IN.
