- Top Page >
- Parts Description >
- Rear
Rear
LAN- DIGITAL AUDIO OUT (OPTICAL)
- CABLE/ANTENNA
- VIDEO IN 1
- VIDEO IN 2, COMPONENT IN
- HDMI IN 1/3/4
- LAN
Connects to an existing network using an Ethernet cable.
- DIGITAL AUDIO OUT (OPTICAL)
Connects to the optical audio input of digital audio equipment that is PCM/Dolby Digital compatible.
- CABLE/ANTENNA
RF input that connects to your cable or over-the-air antenna.
- VIDEO IN 1
Connect with a composite video cable. When connecting mono equipment, connect to the L (MONO) audio jack.
- VIDEO IN 2, COMPONENT IN
This input can be used as composite video input or as component video input. When connecting mono equipment, connect to the L (MONO) audio jack.
For composite use, connect to VIDEO IN 2 for video, and to AUDIO (L/R) of COMPONENT IN for audio signals.
For component connection, use Y, PB, PR for video signals and also connect to AUDIO (L/R) for audio signals.
- The TV will automatically detect and switch between VIDEO IN 2 and COMPONENT IN. To manually set the input type, press
, select 
→ [Channels & Inputs] → [Video 2/Component Selection].
- The TV will automatically detect and switch between VIDEO IN 2 and COMPONENT IN. To manually set the input type, press
- HDMI IN 1/3/4
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between this TV and any HDMI-equipped audio/video equipment. In addition, when you connect equipment that is compatible with “Control for HDMI,” communication with the connected equipment is supported.
- Be sure to use only an authorized HDMI cable bearing the HDMI logo.
- If connecting a digital audio system that is compatible with Audio Return Channel (ARC) technology, use HDMI IN 1. If not, an additional connection with DIGITAL AUDIO OUT (OPTICAL) is necessary.
- If the equipment has a DVI jack, connect it to HDMI IN 4 through a DVI - HDMI adapter interface (not supplied), and connect the equipment’s audio out jacks to PC/HDMI 4 AUDIO IN.
