Displaying the Smartphone’s Screen on the TV (One-touch mirroring)
By simply touching a mobile device (such as a smartphone or tablet) on the Touchpad Remote Control, you can display its screen on your large TV screen.
You can use this “One-touch mirroring” function with a One-touch mirroring compatible device (e.g. some models of Xperia).
Set the NFC* setting of your smartphone to on.
* NFC: Near Field Communication
Touch the NFC detection area of the smartphone to the mark on the Touchpad Remote Control for about 2 seconds.
Remove the smartphone from the remote when the device confirmation completion message appears at the bottom of the TV screen.
When the smartphone is connected with the TV, the screen displayed on the smartphone will also be displayed on the TV.
To optimise the One-touch mirroring function (for experts)
When the standby screen for Screen mirroring is displayed, press the OPTIONS button, then select [Optimise One-touch mirroring].
[Off]: Normally use this option. It uses the same wireless channel at 2.4GHz as the wireless router (or access point) is using.
[Auto]: This option uses a wireless channel that may improve video streaming quality. When you select this setting, the wireless connection between the TV and the wireless router (access point) is disconnected during One-touch mirroring, therefore communication via the Internet (such as an incoming call) is stopped.
When your TV is connected to a wireless router (or access point) at 2.4GHz, you can optimise the wireless connection for the One-touch mirroring function.
- For connection with Xperia, release the screen lock of Xperia, then touch.
- For the position of the NFC detection area on the smartphone, refer to the instruction manual of the smartphone.
- If the TV cannot recognise and connect with the smartphone, try again.