Connects the supplied mains adaptor.

Depending on the model of your TV, it may not be equipped with this jack. In this case, the mains adaptor will also not be supplied.

You can listen to the TV’s sound on a connected home theatre system with digital audio input (optical).

This input can be used as a composite video input or as a component video input. When connecting a mono device, connect to the L (MONO) audio jack (socket).

For a composite connection, use AV2 for video signals, and also connect to (L/R) of / COMPONENT IN for audio signals.

For a component connection, use Y, PB, PR for video signals, and also connect to (L/R) for audio signals.

• The TV will automatically detect and switch between AV2 and / COMPONENT IN. To manually set the input type, press the HOME button, then select [Settings] → [External Inputs] → [AV2/Component Input].

Connect with a SCART cable. When you connect an analogue decoder, the TV tuner outputs scrambled signals to the decoder, and the decoder unscrambles the signals before outputting them.

• The SCART out setting must be made when outputting digital RF on certain models or in certain regions.
  Press the OPTIONS button, then select [SCART REC on].

Connects to an existing network using an Ethernet cable.

Provides access to pay TV services. For details, refer to the instruction manual supplied with your CAM.

• Do not insert the smart card directly into the TV CAM slot. It must be fitted into the Conditional Access Module provided by your authorised dealer.

• CAM is not supported in some countries/areas. Check with your authorised dealer.

• A CAM message may appear when you switch to a digital programme after using the Internet video.