3D pictures are not displayed. 3D effect is weak.

• Be sure that there are no obstacles between the 3D Sync Transmitter and the 3D Glasses.
• Replace the battery in the 3D Glasses, or charge the battery if the 3D Glasses have a rechargeable battery.
• Be sure that the 3D Glasses are powered on.
• If two pictures are displayed side-by-side, press the 3D button repeatedly until [Side-by-Side] appears. If two pictures are displayed one above the other, press the 3D button repeatedly until [Over-Under] appears.
• If the [3D Display] screen appears and 3D pictures are not displayed, turn off the device that plays 3D content and turn it on again.
• Perceived 3D effect may vary from person to person.
• 3D effect may be less pronounced if ambient temperature is low.
• 3D effect may be less pronounced and the display colour will be shifted if you lie down or tilt your head.

A 3D Sweep Panorama photo cannot be displayed.

• Displaying a 3D Sweep Panorama photo is available only when [Slideshow Effect] is set to [Simple]. To confirm the setting, press the OPTIONS button, then select [Playback Options] → [Slideshow Effect].

Black bars appear on both sides of the screen when watching 3D pictures.

• Black bars appear on both sides of the screen in order to process 3D signals for the simulated 3D display mode or when adjusting the depth of 3D pictures in [3D Depth Adjustment].

3D display automatically switches on when 3D signal is detected.

• Set to manually turn the 3D display on or off. Press the HOME button, then select [Settings] → [Display] → [3D Settings] → [Auto 3D] → [Off].

The message [3D signal is detected.] automatically appears when 3D signal is detected.

• Deactivate the [3D Signal Notification] setting. Press the HOME button, then select [Settings] → [Display] → [3D Settings] → [3D Signal Notification] → [Off].

You cannot turn the 3D Glasses on.

• Charge the battery. (Applies only to TDG-BR750/BR250/BR200.)

• Replace the battery. (Applies only to TDG-BR100/BR50.) For details, refer to the instruction manual supplied with the 3D Glasses.

You cannot charge the 3D Glasses. (Applies only to TDG-BR750/BR250/BR200.)

• Check if the TV is turned on. The 3D Glasses cannot be charged if the TV is in standby mode.
• Check if the 3D Glasses are turned off. The 3D Glasses must be turned off to charge.
• Check if the USB cable is connected properly.

LED indicator on the 3D Glasses flashes.

• Flashes every few seconds: Indicates the glasses are powered on.

• Flashes 3 times: Indicates the glasses have been powered off. The glasses turn off if you hold the power button down for 2 seconds, or if no signal from the 3D Sync Transmitter is detected for more than 5 minutes.

• Flashes 3 times every 3 seconds: Indicates the battery capacity is almost running out. Replace the battery, or charge the battery if the 3D Glasses have a rechargeable battery.

  (The following illustration shows TDG-BR250.)

  

  LED Indicator

3D Glasses do not fit properly. (Applies only to TDG-BR100.)

• Set both the switches on either side for a comfortable fit. Close the temple arms slightly inwards to set the switch. ()

• Bend (adjust) the temple frames for a comfortable fit. ()

• Adjust the nose pad for your nose. ()