Selecting the Auto Calibration type (Calibration Type)
You can select a calibration type after you have performed the Auto Calibration and saved the settings.
- Select [Settings] - [Speaker Settings] from the home menu.
- Select [Calibration Type].
- Select the setting you want.
- Full Flat: Makes the measurement of frequency from each speaker flat.
- Engineer: Sets to “the Sony listening room standard” frequency characteristics.
- Front Reference : Adjusts the characteristics of all of the speakers to match the characteristics of the front speaker.
- Off
Note
- This function does not work in the following cases:
- [2ch Analog Direct] is being used.
- Headphones are connected.
- The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format.
Hint
- You can also select [Calibration Type] in [Sound Effects] from the home menu.