1. (on/standby)
   Turns the receiver on or sets it to the standby mode.

   Saving power in standby mode

   Save power by setting the receiver as follows:
   • Set [Control for HDMI], [Remote Start], [Bluetooth Standby] and [Quick Start/Network Standby] (*) to [Off].
   • Turn off the power for Zone 2, Zone 3 and HDMI zone. (for STR-DN1060 only)
2. Input buttons
   Select the input channel connected to the device you want to use.
   When you press any of the input buttons, the receiver turns on.
3. BLUETOOTH RX/TX
   Switches the BLUETOOTH mode of the receiver. (Disabled while the BLUETOOTH function or Screen mirroring function is activated.)
   In BLUETOOTH RX mode, the receiver receives and outputs audio from the remote device.
   In BLUETOOTH TX mode, the receiver sends audio to the remote device.
4. MIRRORING
   Starts the Screen mirroring function.
5. HDMI OUTPUT
   Switches the output for two monitors connected to the HDMI OUT A (TV) and HDMI OUT B/HDMI ZONE jacks. Output is toggled between [HDMI A], [HDMI B], [HDMI A+B] and [HDMI OFF] each time the button is pressed. Select [HDMI OFF] to turn off the output for HDMI OUT A and HDMI OUT B jacks. (for STR-DN1060 only)
   Turns the output for HDMI TV OUT on/off. (for STR-DN860 only)
6. WATCH, LISTEN
   Select [Watch] or [Listen] on the home menu directly. When pressing these buttons on the Watch or Listen screen, you can move the focus to select the desired input.
7. CUSTOM PRESET (1, 2, 3)
   Saves and recalls various settings for the receiver. Press to select the custom preset setting(s). Press and hold to save the current settings to a preset.
8. A.F.D./2CH, MOVIE, MUSIC
   Select a sound field.

^* For USA, Canadian and Asia-Pacific models only.

Note

• The above explanations are intended to serve as examples.
• Depending on the model of your connected device, some functions explained in this section may not work with the supplied remote control.