MULTI CHANNEL AV RECEIVERSTR-DN1060/STR-DN860

Enjoying audio content using the BLUETOOTH function (Pairing operation)

Pairing is an operation where BLUETOOTH devices are registered to each other before connection. Once a pairing operation is performed, it does not need to be performed again. Be sure to set the [Bluetooth Mode] to [Receiver] before pairing a device with this receiver.

  1. Place the BLUETOOTH device within 1 meter (3.3 feet) of the receiver.
  2. Press and hold CONNECTION PAIRING BLUETOOTH on the receiver to select the BLUETOOTH function.

    [PAIRING] flashes on the display panel. Perform step 3 within five minutes, otherwise pairing will be canceled. If pairing is canceled, repeat this step.

  3. Perform pairing on the BLUETOOTH device to detect this receiver.

    For details, refer to the operating instructions of your BLUETOOTH device.
    A list of detected devices may appear on the BLUETOOTH device display depending on the type of BLUETOOTH device. This receiver is displayed as [STR-DN1060] or [STR-DN860].

  4. Select [STR-DN1060] or [STR-DN860] on the BLUETOOTH device display.

    If [STR-DN1060] or [STR-DN860] is not displayed, repeat this process from step 1.

  5. When the BLUETOOTH connection is established, the device name appears and [BT] lights in the display panel.
  6. Start playback on the BLUETOOTH device.
  7. Adjust the volume.

    Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust the volume level of the receiver.

Canceling pairing operation

Switch the input.

Note

  • When establishing a connection with this receiver in step 4, select the audio profile (A2DP or AVRCP) on the BLUETOOTH device. If the BLUETOOTH device does not support the AVRCP profile, you cannot perform playback or other operations on the receiver.
  • If a passkey is required on the display of the BLUETOOTH device in step 5, enter [0000]. The passkey may be called “Passcode,” “PIN code,” “PIN number” or “Password.”
  • You can pair up to 9 BLUETOOTH devices. If a 10th BLUETOOTH device is paired, the least recently connected device will be replaced by the new one.
  • CONNECTION PAIRING BLUETOOTH on the receiver does not work when the [Bluetooth Mode] is set to [Off].

Hint

  • You can change the name of the receiver that appears on your device in [Device Name] in the System Settings menu.
  • On some types of BLUETOOTH devices, you can adjust the volume using the controls of the BLUETOOTH device.
Go to Page Top

Related Topic

Go to Page Top