MULTI CHANNEL AV RECEIVERSTR-DN1060/STR-DN860

3. Setting the priority for the main zone (Priority) (for STR-DN1060 only)

If you select the same HDMI input for the main zone and HDMI zone when the HDMI zone function is enabled, there may be some interference to the audio and video signals in the main zone. To avoid possible interference, you can place priority on the main zone for HDMI input selection.

  1. Select [Setup] - [HDMI Settings] from the home menu.
  2. Select [Priority].
  3. Select the setting you want.
    • Main & Zone:
      You can enjoy the same input in the main zone and HDMI zone. However, there may be some interference between the audio and video signals in the main zone and those in the HDMI zone.
    • Main Only:
      You can enjoy good audio and video quality in the main zone. However, if the same input is selected in HDMI zone, there will be no video or audio output from HDMI zone.

Note

  • This function works only when [HDMI Out B Mode] is set to [Zone].

Hint

  • If you connect TVs that have different resolutions to the main zone and HDMI zone but select the same HDMI input for both zones, the lower of the two resolutions is used for the video signals output to both TVs.
Go to Page Top