IC RecorderICD-BX140
Adding a recording to a previously recorded file (ADD)
You can add a recording to the file being played back. The added recording will be placed after the current file, and will be counted as a part of the file.
A: During playback of file 3
B: After adding a recording
C: Added recording
- In the stop mode, press MENU to enter the menu mode.
- Press
or
to select “REC-OP,” and then press
PLAY/ENTER.
- Press
or
to select “ON,” and then press
PLAY/ENTER.
- Press
or
to select “ADD,” and then press
PLAY/ENTER.
- Press
(stop) to exit the menu mode. - When the file to be added is played back, press
REC/PAUSE.
and “ADD” flash and the IC recorder stops in the recording pause mode.
- While “ADD” is flashing, press
REC/PAUSE.
The operation indicator lights in red, and the recording is added at the end of the current file.
- Press
(stop) to stop recording.
Descriptions of menu items
You can select one of the menu items available.
ON :
The REC-OP function is active. You can add recording to the file being played, by selecting “ADD” after selecting “REC-OP.”
OFF :
The REC-OP function does not work.
(Initial setting)
Note
- You cannot add a recording if the remaining memory is insufficient.
- You cannot add a recording to a protected file. To add a recording, release the protection first.
- The added portion of a file will be recorded in the same recording mode.
- If 10 minutes have passed after step 6, you must start the procedure again from the beginning.
Go to Page Top